Specifications:
Brand: Gokwh
Name: Energy Storage Box
Cell Type: LiFePO4(LFP)
Dimensions: L345*W190*H245mm
Terminal Type: M8
Case Material: ABS(Flame Retardant Plastic)
BMS Bulit-in: 100A BMS
Warranty: 5 Year
Nominal Voltage: 25.6 V
Nominal Capacity: 2560 Wh
Charge Method: CC/CV
Recommend Charge Voltage: u226429.2V
Recommend Charge Current: u226450 A
Recomend Discharge Cut-off Voltage: u226520V
Recomend Discharge Current: u2264100 A
Internal Resistance: u226430 mu03a9
Cycle Life: u22654000 Cycles
Service Life: 10 Years
Protection: IP65, Built-in Bluetooth BMS
Temperature Range:
Charge: 0~45u00b0C (32~113u00b0F)
Discharge: -20~60u00b0C (-4~140u00b0F)
Storage: -10~45u00b0C (14~113u00b0F)
Parallel Connection: Up to 4P 25.6V 400Ah 10.24kWh
Series Connection: Up to 2S 51.2V 100Ah 5.12kWh

Features:
- Advanced LiFePO4 Technology: The Gokwh Energy Storage Box uses Grade A LiFePO4 prismatic cells, providing superior cycle life expectancy even under heavy and varied loads. With a lifespan of over 4000 cycles, it is designed for long-term stability and performance.

- Built-in Bluetooth Monitoring: This energy storage box features built-in Bluetooth, allowing you to monitor your battery"s performance through a smart app. Track essential parameters including current, voltage, temperature, and cycle count in real-time directly from your mobile device.

- Comprehensive BMS Protection: Equipped with a 100A Battery Management System (BMS), the Gokwh Energy Storage Box offers robust safety features. It includes overvoltage, undervoltage, overcurrent, short circuit, and temperature protections, ensuring safe and efficient operation.

- IP65 Waterproof Rating: The IP65-rated enclosure makes this energy storage solution ideal for various environmental conditions. It protects against dust and low-pressure water jets, making it suitable for both indoor and outdoor applications.

- Scalable Energy Solution: Easily expandable, the Gokwh Energy Storage Box allows for parallel connections up to 4P and series connections up to 2S. This flexibility makes it suitable for larger capacity setups and customized energy storage answers.

Package Included:
1 x Energy Storage Box
1 x Built-in 100A BMS
2 x M8 Terminal Bolts
1 x User Manual
1 x Warranty Card

Battery Connection:
Safe and reliable installation requires trained and certified technicians. Therefore, the purpose of
this section is only to serve as a guideline as all scenarios cannot be covered.
Preparationuff1a
Before the installation and operation of the battery, it is recommended to have the following
equipment or tools available:
Inspection:
Please check for visible damage including cracks, dents, deformation, and other visible abnormalities. The top of the battery and terminal connections should be clean, free of dirt and corrosion,
and dry. If any problems are detected with the battery, please contact us for assistance. Refer to the
last page of the manual for contact information.
Cable Sizing:
Battery cables (sold separately) should be appropriately sized to handle the expected load.
Please refer to the following table for the ampacities of copper cables with different gauge sizes.

WARNINGS
. DO NOT immerse the battery in water or allow it to get wet.
. DO NOT use or store the battery near sources of heat such as a fire or heater.
. DO NOT reverse the positive (+) and negative (-) terminals.
. DO NOT connect the battery directly to wall outlets or car power socket with lighter function without proper charging equipment. DO NOT allow exposed ends of cables connected to opposite terminals to touch.
. DO NOT put the battery into a fire or apply direct heat.
. DO NOT use the battery if the battery casing has been pierced, broken, cracked,or otherwise visibly damaged. DO NOT forcibly open the battery casing for any reason.
. Avoid severe physical shock. Do not throw the battery or heavily hit the battery in any way. Do not put excessive pressure or step on the battery.
. Never solder anything directly to the battery terminals.
. DO NOT attempt to disassemble or modify the battery in any way.
. DO NOT place the battery in a microwave oven or pressurized container